SC490 Heat Pump Control Center
The space-saving all-in-one solution for the boiler room.
Plug & Heat-ready: hydraulically installed and electrically wired: heating, cooling, and hygienic hot water in one compact solution.
ALL IN ONE The SC490 heat pump system control center combines storage, hot water, hydraulics, and control into a single compact unit.
Available starting in Q3 2026
- 490 l – Total volume
- 6 kW electric heating element
- Hygienic Hot Water Production Using a Stainless Steel Corrugated Tube Heat Exchanger
- Magnetic Sludge Separator, including insulation
- Models with 1 or 2 heating/cooling circuits (SC490-1 / SC490-2)
- Includes AP440 and IM110 central control units
Plug&Heat saves time
The SC490 system control unit is delivered as a pre-assembled unit: fully assembled hydraulically and pre-wired electrically. This reduces the number of interfaces, simplifies installation, and ensures quick and safe commissioning.
Perfect for M-TEC heat pumps
Perfectly matched to all M-TEC heat pumps up to 20 kW and directly integrable into the M-TEC Energy System. This creates a seamless, integrated system comprising the heat pump, storage tank, and control system.
All in one device
A buffer tank, hygienic hot-water system, hydraulics, and controls are all integrated into a compact system unit. This saves space in the boiler room and reduces installation effort.
Hot Water in a Compact Solution
Two product variants offer the right solution for different needs in the home. Both models feature the same comprehensive system configuration, including a buffer tank and hygienic fresh water preparation.
Features at a Glance
- 6 kW electric heating element
- Stainless Steel Corrugated Tube Heat Exchanger for Hygienic Hot Water Production (7.5 m² surface area, 36 l capacity)
- Heat Pump Distribution Manifold and Hydraulic Connection Kit
- Magnetic Sludge Separator, including insulation
- Integrated heating circuit control with AP440 touchscreen control panel and IM110 connection module
- Pre-assembled sensor sets and highly efficient insulation
1 Heating/Cooling Circuit (SC490-1)
2 Heating/Cooling Circuits (SC490-2)
Technical data
| Basic Data | |
|---|---|
| Total tank capacity | 490 l |
| Diameter without insulation | 600 mm |
| Diameter with insulation | 700 mm |
| Height with insulation | 1,876 mm |
| Tilt dimension | 2,002 mm |
| Weight depending on the model | 175 kg |
| Materials and Operating Pressure | |
| Tanks | S 235 JR |
| Maximum Permissible Operating Pressure for the Heating Circuit | 3 bar |
| Heat Exchanger Surfaces and Drinking Water Capacity | |
| Stainless Steel Corrugated Pipe for Drinking Water | 7.5 m² |
| Heat Exchanger Capacity | 36 L |
| Energy Labeling | B |
| Max. Water Withdrawal | 25 / 30 l/min |
Compatible with the following heat pumps: AHPA412, AHPA413, AHPA618, AHPC27, AHPC412, APC618, BHPA412, BHPA618, VHPA27-221, including CM (Cover Module)
