M-TEC heat pump-family

You too can rely on the highest quality and reliability.

With the knowledge and experience from over 14,000 installations, we make natural resources usable for your home. Economical and secure, 365 days a year. In addition, M-TEC heat pumps are produced using 100% renewable energy at the location in Upper Austria. Energy that is generated with photovoltaics and the in-house hydropower plant. Whether earth, air or groundwater – with the solutions from M-TEC you use natural resources in an efficient and sustainable way.
heat pump family

Energy sources for M-TEC heat pumps

With the integrated E-Smart functions, you can turn every M-TEC system into the energy concept of the future

Our heat pump models: How to get up to 80% of the energy you need from nature

AIR source - heat pump COMPACT 2-31 KW

This heat pump packs all components in one device and is set up outside. You don't need a technical room. Highest level of innovation through modern control and overheating regulation. Perfectly adjusted to the climate conditions of our regions. Quiet and trouble-free operation.

AIR source - heat pump SPLIT 4-17 KW

The use of the M-TEC split heat pump does not require any digging work in your garden, just some space for the installation. In the split version, the evaporator is on the outside and the heat pump is on the inside.

GROUND source - heat pump 3-52 kW

The heat pump guarantees the highest levels of efficiency, packaged in a timless designed housing. Developed by the heat pump pioneer M-TEC with around four decades of experience. With a tested annual efficiency of 5.81, the Austrian product is one of the best in its class worldwide.

GROUND source- heat pump 2-6 kW

The heat pump is cheap to buy, but offers all M-TEC product advantages in the smallest space. With dimensions of 612 x 610 x 430 mm, the device uses even the smallest of spaces efficiently. Also especially suitable for PVT systems

YouTube

By loading the video, you agree to YouTube's privacy policy.
Learn more

Load video

This is how the M-TEC heat pump works

Heat pumps use solar energy that is stored in the ground. This solar energy is available at al times. Day or night, summer or winter, even infinitely, because it is always renewed.

In principle, the heat pump works like a refrigerator: same technology, only reverse use. The system absorbs heat at a low temperature on the heat source side (earth, water or air) and emits heat at a higher temperature on the heating side.
 
The great thing about the M-TEC heat pumps is its efficiency. Thanks to its special direct evaporation technology, the heat pump converts one kilowatt hour of electricity into five kilowatt hours of heating energy, often even more. This results in extremely low operating costs compared to conventional heating systems.

This is how an M-TEC heat pump is created

You too can rely on highest quality and reliability developed and produced in Austria. A successful concept for a modern, carefree and energy-efficient lifestyle. With the knowledge and experience from over 14,000 installations, we make natural resources usable for your home.
 
Economical and secure, 365 days a year.
YouTube

By loading the video, you agree to YouTube's privacy policy.
Learn more

Load video